| |
To
read the documents, please download Adobe Acrobat Reader
|
|
|
Permanent magnets brushless motors with high torque-to-weight for direct drive
of low inertia load |
Designed with the aim of addressing new industrial needs, ALXION has created ST low inertia motors range for DIRECT DRIVE allowing acceleration up to 20 000 rad/s². 145 ,190 and 300ST ranges present an outstanding compacity with a continuous torque-to-weight up to 3.7 Nm/Kg and a peak torque-to-weight up to 18 Nm/Kg. ALXION |
Permanent torque up to 235 Nm and peak torque up to 1161 Nm
Possibility to use a hollow shaft up to 75 mm diameter
Three motors technologies:
HP : high precision with cogging torque < 1 % for 145 & 190 ST
SP : standard precision with cogging torque = or < 2 % for 145 & 190 ST
X : high precision with cogging torque < 2 %
Position feedback:
Resolvers: precision ±1 arcmin or ±10 arcmin
SinCos encoders: incremental or with commutation track
ENDAT absolute encoders
HIPERFACE® encoders
Protection degree: IP54
Power and signal connections: Class 6, cables 2 meters length
High dynamicsNo reducer
No backlashHigh accuracy servo
Elimination of maintenance
Simplification of the servomechanism
Noise reductionMachine optimization and simplification
| Characteristics of the range |
Proposed in three diameters, 145 ,190 and 300 mm with a large variety of position feedback: resolvers, encoders and a variety of shafts: hollow, blind or solid shaft. Rated torques cover a wide range between 14.8 Nm and 235 N.m, in natural convection, and the peak torque covers from 55 Nm to 1161 Nm. The motors can reach a rated speed up to 1500 rpm.
These motors present an outstanding compacity with a continuous torque-to-weight up to 3.7 Nm/Kg and a peak torque-to-weight up to 18 Nm/Kg.
Two windings are proposed as a standard: 500 and 1500 rpm for 145ST or 500 and 1000 rpm for 190ST and 200 and 800 rpm for 300ST. But the winding can easily be adapted to match your optimum drive rating.
| ST MOTORS RANGE - Complementary data |
|
Motors 145 ST Range Version 400 Vac / 460 Vac |
- Continous torque at stall: from 14.6 up to 47.4 Nm
- Peak torque: from 55 up to 220 Nm
- Rated speed: from 500 up to 1500 RPM
- Hollow shaft: diameter 60 mm standard
|
|
|
| Motors 190 ST Range Version 400 Vac / 460 Vac |
- Continous torque at stall: from 36 up to 111 Nm
- Peak torque: from 119 up to 476 Nm
- Rated speed: from 500 up to 1500 RPM
- Hollow shaft: diameter 75 mm standard
|
|
|
|
Motors 300 ST Range Version 400 Vac / 460 Vac |
- Continous torque at stall: from 54 up to 235 Nm
- Peak torque: from 193 up to 1161 Nm
- Rated speed: from 200 up to 800 RPM
- Hollow shaft: diameter 72 mm standard
|
|
|
| Codification for ST Motors |
|
|
Full Direct Drive Catalogue |
|
|
Cable marking for ST & STK motors
|
|
|
Download External drawings
|
|
|
|
